Description

TEAMMACHINE 2023 – ROAD RACE, ALTITUDE SERIES UNMATCHED PERFORMANCE The Altitude series is a collection of BMCs lightest frames. Race road bikes designed for unmatched performance when the road points up. The most efficient power transfer to transform every watt into forward motion, up the mountain or in a sprint finish. The right amount of vertical compliance to keep you comfortable and fresh on long racing days and give you extra confidence on rough roads SLR01 AND SLRSERIES Teammachine bikes are broken down into SLR01, SLR, ALR DISC and ALR families. The BMC SLR01 series is the top of the line series in the Teammachine range and uses BMCs lightweight carbon. The SLR is identical in design however uses a slightly heavier carbon layup whilst sharing all the key attributes of the SLR01. The Teammachine have many aerodynamic features. The fork profile and seat post are both designed to cut through the air with minimum resistance, while the integrated cockpit hides all the cables inside the handlebars. The frame has even been designed to be aerodynamic even with bottles mounted. ACCELERATED COMPOSITES EVOLUTION TECHNOLOGIE + (ACE+) ACE+ not only runs through thousands of virtual prototypes using Stiffness, Weight and Compliance as key influencers, but now includes a fourth key factor in the prototyping, Aerodynamics. INTEGRATED COCKPIT SYSTEM (ICS) CARBON ICS Carbon, is a one-piece cockpit with an incredible low weight, high stiffness, stealth cable routing and integrated device mounts for the most popular devices. D-SHAPE SEAT POST Improved seatpost design removing any excess materials, providing aerodynamic benefits and extra compliance. BOTTOM BRACKET AND TORSIONAL STIFFNESS Renowned for its power transfer, the new Teammachine SLR goes one step further with a wider bottom bracket contact area provided by the new downtube shape and the optimized carbon layup FORK PROFILE An aerodynamically reshaped fork with stealth dropout design and integrated thru-axle nut show that high technical proficiency can go hand in hand with beautiful, minimalist aesthetics. AEROCORE DESIGN Our Aerocore system consists of two superlight carbon cages that seamlessly integrate into the reshaped downtube and seat tube, resulting in significant drag reduction when used with bottles. SPECIFICATIONS FRAME Teammachine SLR Carbon with Aerocore Design | Stealth Dropout Design | TCC Race Compliance Level | PF86 Bottom Bracket | Flat Mount Disc | 12x142mm Thru-Axle | Optimized for Aerocore Bottle Cages FORK Teammachine SLR Carbon | TCC Race Compliance Level | Internal Cable Routing | Flat Mount Disc | Stealth Dropout Design | 12x100mm Thru-Axle SEATPOST Teammachine SLR Carbon D-Shaped Seatpost | 15mm Offset HANDLEBAR BMC RAB 02 – Ergo Top Shape – Compact Bend STEM BMC RSM01 SADDLE Fizik Antares R7 CRANKSET SRAM RIVAL AXS 48-35T CASSETTE SRAM RIVAL XG-1250 10-36T CHAIN SRAM RIVAL 12 Speed FRONT DERAILLEUR SRAM RIVAL eTap AXS REAR DERAILLEUR SRAM RIVAL eTap AXS SHIFTERS SRAM RIVAL eTap AXS HRD BRAKES SRAM Rival eTap AXS HRD – Centerline X Rotors (160/160) RIMS XRD-522 – Tubeless Ready – 25 mm HUBS XRD-522 TYRES Vittoria Rubino – 25mm AVAILABLE SIZES 47 – 51 – 54 – 56 – 58 – 61 TYRE CLEARANCE 30mm (Measured Width) RIDER WEIGHT LIMIT 110 Kg